Samsung Galaxy S27 Ultra

As of November 2026, the Samsung Galaxy S27 Ultra is Samsung's next generation flagship smartphone that has not yet been officially released. Currently, all publicly available information comes from cross validation in the supply chain and industry, and is expected to be officially launched in the first half of 2027.

Appearance and Screen: The body has bid farewell to the vertical floating lens module that has been used for nearly 6 years, and has been replaced with a horizontal large matrix image layout. The frame has been narrowed to 1.28mm, the overall thickness is about 7.9mm, and the weight is about 215g. The screen adopts M16 material LTPO OLED panel, with a size of about 6.89-6.9 inches and a peak brightness of 3200 nits. It supports hardware level privacy protection function and can enable privacy protection on one side and normal display on the other side in split screen mode.

Core Performance: The global version is uniformly equipped with the sixth generation Snapdragon 8 Super Supreme Edition custom chip, using a 2-nanometer process technology. The starting memory is 12GB LPDDR6, and the highest optional 16GB version is available. The storage comes standard with UFS 5.0 high-speed flash memory, with an interface speed of up to 10.8GB/s. The top of the line version can provide up to 16GB+1TB. It is the first to be equipped with a closed active liquid cooling circulation heat dissipation structure, and the body temperature is 4-6 ℃ lower than the previous generation during long-term high load operation.

Imaging system: Cut off the previous generation independent 3x telephoto lens, retain the 200 million pixel ISOCELL HP6 main camera (supporting F1.4-F2.8 dual variable aperture and LOFIC technology), 50 million pixel ultra wide angle lens, 50 million pixel 5x periscope telephoto lens, upgrade the front camera to a 16 million pixel square sensor, automatically switch the frame for horizontal and vertical selfies, support Polar ID polarized light facial recognition, effectively prevent photos and masks from being cracked, and reduce the component volume by 50% compared to traditional solutions.

Battery life and interface: The 3C certified rated capacity of the battery is 5534mAh, with a nominal capacity of about 5700mAh. It supports Qi2 magnetic wireless charging, and the wired charging specification is expected to be 60W. The bottom of the body retains a USB Type-C interface, and the built-in storage S Pen handwriting pen is located in the lower left corner of the body. The back cover is made of second-generation Gorilla armored glass, which has a 30% increase in scratch and wear resistance compared to the previous generation.

The approximate parameters are as follows: