Google Pixel 10

On June 26th, it was reported that the detailed specifications of the Google Pixel 10 standard version phone were recently exposed, and the phone is expected to be released on August 20th and released on August 28th.

In terms of screen configuration, this new device is equipped with a 6.3-inch FHD+display, supporting a maximum refresh rate of 120Hz, and continues to use Corning Gorilla Glass Victus 2 for screen protection. It is worth noting that the screen brightness has significantly improved, increasing from 1800nits to 2000nits in high brightness mode, and the peak brightness has increased from 2700nits to 3000nits.

In terms of chip performance, Pixel 10 is equipped with Tensor G5 chip manufactured by TSMC's 3nm process. As a high-performance processor, this chip is expected to achieve further breakthroughs in computing speed and energy efficiency ratio. In terms of storage combination, the memory has been upgraded to 12GB, and there are two options for storage capacity: 128GB and 256GB, to meet the storage needs of different users.

The battery and charging capacity have also been upgraded. The battery capacity of Pixel 10 has increased by about 5% to 4970mAh, while the charging speed has been improved. The wired charging power reaches 29W, and the wireless charging speed is 15W, and it supports Qi2 wireless charging standard.

In terms of imaging system, the camera configuration of Pixel 10 has been adjusted. To add a 5x telephoto lens to the base version, Google has reduced the specifications of the other two cameras. The main camera will use a 48 megapixel sensor, which is likely to be the same as the Pixel 9a, with a 1/2.0 inch specification; The ultra wide angle camera has been significantly downgraded to 12 million pixels.

Its main parameters are as follows: